Www.asus.com Or This User Manual For The Memory Qvl
Install a 64-bit WindowsWindows® OS when you want to install 4GB or more memory on the motherboard.Due to CPU spec., AMD 100 and 200 series CPUs support up to DDR3 1066Mhz. With ASUS design, this motherboard can support up to DDR3 1333MHz.Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List) - Expansion Slots. Memory QVL (Qualified Vendors Lists) in this user manual or on the ASUS website at. If you turn off the computer and replace DIMMs during the tuning process, the system. Continues memory tuning after turning on the computer. To stop memory tuning, turn off. The computer and unplug the power cord for about 5–10 seconds.
- Refer To Www.asus.com Or User Manual For Memory Qvl (qualify Vendor List)
- Www.asus.com Or User Manual For Memory Qvl (qualify Vendor List)
- Refer To Www.asus.com Or This User Manual For The Memory Qvl (qualified Vendors Lists)
- Refer To Www.asus.com Or This User Manual For The Memory Qvl
1-37
Chapter 1: Product introduction
2.
MemOK! switch
Installing DIMMs that are incompatible with the motherboard may cause system boot failure,
and the DRAM_LED near the MemOK! switch lights continuously. Press and hold the
MemOK! switch until the DRAM_LED starts blinking to begin automatic memory compatibility
tuning for successful boot.
• Refer to section 1.12 Onboard LEDs for the exact location of the DRAM_LED.
• The DRAM_LED also lights when the DIMM is not properly installed. Turn off the system
and reinstall the DIMM before using the MemOK! function.
• The MemOK! switch does not function under Windows
®
OS environment.
• During the tuning process, the system loads and tests failsafe memory settings. It takes
about 30 seconds for the system to test one set of failsafe settings. If the test fails,
the system reboots and test the next set of failsafe settings. The blinking speed of the
DRAM_LED increases, indicating different test processes.
• Due to memory tuning requirement, the system automatically reboots when each timing
set is tested. If the installed DIMMs still fail to boot after the whole tuning process, the
Refer To Www.asus.com Or User Manual For Memory Qvl (qualify Vendor List)
DRAM_LED lights continuously. Replace the DIMMs with ones recommended in the
Memory QVL (Qualified Vendors Lists) in this user manual or on the ASUS website at
www.asus.com.
• If you turn off the computer and replace DIMMs during the tuning process, the system
continues memory tuning after turning on the computer. To stop memory tuning, turn off
the computer and unplug the power cord for about 5–10 seconds.
• If your system fail to boot due to BIOS overclocking, press the MemOK! switch to boot
and load BIOS default settings. A message will appear during POST reminding you that
the BIOS has been restored to its default settings.
• We recommend that you download and update to the latest BIOS version from the
ASUS website at www.asus.com after using the MemOK! function.
P8P67 LE
P8P67 LE MemOK! switch
ASUS P8H67-M LE Series
1-17
1.8
Onboard switches
Onboard switches allow you to fine-tune performance when working on a bare or open-case
system. This is ideal for overclockers and gamers who continually change settings to
enhance system performance.
MemOK! switch
Installing DIMMs that are incompatible with the motherboard may cause system boot failure,
Www.asus.com Or User Manual For Memory Qvl (qualify Vendor List)
and the DRAM_LED near the MemOK! switch lights continuously. Press and hold the
MemOK! switch until the DRAM_LED starts blinking to begin automatic memory compatibility
tuning for successful boot.
• Refer to section 1.9 Onboard LEDs for the exact location of the DRAM_LED.
• The DRAM_LED also lights when the DIMM is not properly installed. Turn off the system
and reinstall the DIMM before using the MemOK! function.
• The MemOK! switch does not function under Windows® OS environment.
• During the tuning process, the system loads and tests failsafe memory settings. It takes
about 30 seconds for the system to test one set of failsafe settings. If the test fails,
the system reboots and test the next set of failsafe settings. The blinking speed of the
DRAM_LED increases, indicating different test processes.
• Due to memory tuning requirement, the system automatically reboots when each timing
set is tested. If the installed DIMMs still fail to boot after the whole tuning process, the
DRAM_LED lights continuously. Replace the DIMMs with ones recommended in the
Memory QVL (Qualified Vendors Lists) in this user manual or on the ASUS website at
www.asus.com.
• If you turn off the computer and replace DIMMs during the tuning process, the system
continues memory tuning after turning on the computer. To stop memory tuning, turn off
the computer and unplug the power cord for about 5–10 seconds.
• If your system fail to boot due to BIOS overclocking, press the MemOK! switch to boot
and load BIOS default settings. A message will appear during POST reminding you that
the BIOS has been restored to its default settings.
Refer To Www.asus.com Or This User Manual For The Memory Qvl (qualified Vendors Lists)
• We recommend that you download and update to the latest BIOS version from the
Refer To Www.asus.com Or This User Manual For The Memory Qvl
ASUS website at www.asus.com after using the MemOK! function.
P8H67-M LX
P8H67-M LX MemOK! switch